Ahhhhh a new candle, there's nothing quite like lighting it up for the first time, but! Performing the first burn correctly is cruicial to the performance of your candle.

Allow the wax to melt all the way to the edge of the jar creating a nice even melt pool before snuffing the flame. This can usually take between 1 - 2 hours for a full melt pool to occur.

We recommend burning your candle for 2 - 3 hours on it's first burn to allow the candle to release its full potential of that wonderful fragrance and create a beautiful flow on effect for your next burn.

Your candle will arrive to you with a pre-trimmed wick by us.

Please ensure you trim your wick in between burns to maintain a healthy flame and even burn. If your wick is too long you may find it will begin to mushroom which is completely normal, however will cause your candle to burn faster.

Mushrooming is caused by excess carbon build up.

Keep your wick trimmed to approx 1/4 inch.

There is nothing worse than a candle that tunnels. To best avoid tunnelling follow the steps laid out in the "first burn" tab. Most candle tunnelling issues happen when the first burn isn't done properly.

Always allow your candle to melt to the edge of the jar each time before snuffing the flame.

You can write to us and we'll help out!

Keep out of reach of children and pets. Do not expose to direct sunlight. Keep away from flammable objects and curtains.

Ensure adequate ventilation and use on an even, heat resistant surface.

Contain will be hot whilst your candle is burning and discontinue use if the jar becomes too hot or damaged.

Never burn your candle if the wax is lower than the tab or below 10mm.

Never leave a lit candle unattended or in a small confined space.

Never burn for longer than 4 hours.

Failure to follow these warnings may result in injury, hazard or fire.